Screw-On 3D StNi wooden point

DESCRIPTION:
Field point for wooden arrows, nickel plated steel with cylindrical hole (parallel) threaded. It screws on the raw shaft.
Available in diameters: 5/16" with weights 70 and 100 grains in diameter 11/32" with weights 80 and 100 grains in diameter and 23/64" with weight of 125 grains.

SUGGESTIONS:
The point screws directly on the shaft without tapering it but I recommend lightly sand the edge of the shaft to facilitate the insertion and, also, not to overtighten it, specially dangerous if you’re going to use a tool, as this may twist the wood fibers weakening the shaft in the auction area more prone to breakage.

MY IMPRESSIONS:
I do not believe that some forms of tip are better suited than others on the 3D targets but many do and so I leave the shape prefer to personal teste. I have no experience with screwing point as I prefer the taper hones to glue on shaft but I guess that is comfortable for the less experienced.

MADE IN GERMANY